Semiochemical delivery systems based on natural polymers to attract sand flies (Diptera: Psychodidae).

BACKGROUND: The successful use of semiochemicals to attract insects to traps is based on research on the most suitable compounds and their release profiles over time. Based on the group's promising results, matrices with a more adequate release profile and more eco-friendly properties for the release of 1-hexanol were developed. To use a more suitable prototype in the field, the most promising systems were added to a capsule and evaluated in a wind tunnel. Behavioral experiments were performed using the sand fly species, Lutzomyia longipalpis, to evaluate the efficacy of the proposed system. METHODS: Different delivery systems were developed by varying the polymer (gellan gum and pectin) ratio, crosslinker (aluminum chloride) concentration, and glutaraldehyde removal.The delivery systems were loaded with 1-hexanol, and their release profiles were evaluated using gravimetric analysis under ambient and high-humidity conditions. When the matrix system was placed inside a plastic container, modulations in the active release profile were observed and the system could be reused. Actid attraction behaviors of the sand fly species, Lu. longipalpis, were evaluated in a wind tunnel when exposed to 1-hexanol-loaded release systems at different times. RESULTS: Among the four formulations evaluated, System 2 (gellan gum and pectin in a 1:1 ratio with 5% aluminum chloride) exhibited the most promising release profile, with greater uniformity and longer compound release time. The maximum 1-hexanol release uniformity was achieved over a longer time, mainly every 24 h, under both ambient and high-humidity conditions. System 2 can be reused at least once with the same structure. The wind tunnel trials exhibited efficient activation and attraction of Lu. longipalpis to 1-hexanol after 24, 48, and 72 h in System 2 placed inside the capsules. CONCLUSIONS: The polymeric matrix supplemented with 1-hexanol and introduced in plastic capsules showed promising results in attracting sand flies. This system can be used as a solution for other attractive compounds as well as in other applications where their release needs to be controlled or prolonged.

Solid dispersions based on chitosan/hypromellose phthalate blends to modulate pharmaceutical properties of zidovudine.

Zidovudine (AZT) has been widely used alone or in combination with other antiretroviral drugs for the treatment of human immunodeficiency virus. Its erratic oral bioavailability necessitates frequent administration of high doses, resulting in severe side effects. In this study, the design of mucoadhesive solid dispersions (SDs) based on chitosan (CS) and hypromellose phthalate (HP) was rationalized as a potential approach to modulate AZT physicochemical and pharmaceutical properties. SDs were prepared at different drug:polymer ratios, using an eco-friendly technique, which avoids the use of organic solvents. Particles with diameter from 56 to 73 µm and negative zeta potentials (-27 to -32 mV) were successfully prepared, achieving high drug content. Infrared spectroscopy revealed interactions between polymers but no interactions between the polymers and AZT. Calorimetry and X-ray diffraction analyses showed that AZT was amorphized into the SDs. The mucoadhesive properties of SDs were evidenced, and the control of AZT release rates from the matrix was achieved, mainly in acid media. The simple, low-cost, and scalable technology proposed for production of SDs as a carrier platform for AZT is an innovative approach, and it proved to be a feasible strategy for modulation the physico-chemical, mucoadhesive, and release properties of the drug.

The role of polysaccharides from natural resources to design oral insulin micro- and nanoparticles intended for the treatment of Diabetes mellitus: A review.

Oral administration of insulin (INS) would represent a revolution in the treatment of diabetes, considering that this route mimics the physiological dynamics of endogenous INS. Nano- and microencapsulation exploiting the advantageous polysaccharides properties has been considered an important technological strategy to protect INS against harsh conditions of gastrointestinal tract, in the same time that improve the permeability via transcellular and/or paracellular pathways, safety and in some cases even selectivity for targeting delivery of INS. In fact, some polysaccharides also give to the systems functional properties such as pH-responsiveness, mucoadhesiveness under specific physiological conditions and increased intestinal permeability. In general, all polysaccharides can be functionalized with specific molecules becoming more selective to the cells to which INS is delivered. The present review highlights the advances in the past 10 years on micro- and nanoencapsulation of INS exploiting the unique natural properties of polysaccharides, including chitosan, starch, alginate, pectin, and dextran, among others.

Computational and experimental approaches for chitosan-based nano PECs design: Insights on a deeper comprehension of nanostructure formation.

Nanostructured polyelectrolyte complexes (nano PECs) based on biopolymers are an important technological strategy to target drugs to the action and/or absorption site in a more effective way. In this work, computational studies were performed to predict the ionization, spatial arrangement and interaction energies of chitosan (CS), hyaluronic acid (HA), and hypromellose phthalate (HP), for the design of nano PEC carriers for methotrexate (MTX). The optimal pH range (5.0-5.5) for preparing nano PECs was selected by experimental and computational methodologies, favoring the polymers interactions. CS, HA, HP and MTX addition order was also rationalized, maximizing their interactions and MTX entrapment. Spherical nano-sized particles (256-575 nm, by dynamic light scattering measurement) with positive surface charge (+25.5 to +29.2 mV) were successfully prepared. The MTX association efficiency ranged from 20 to 32 %. XRD analyses evidenced the formation of a new material with an organized structure, in relation to raw polymers.

Mucin-polysaccharide interactions: A rheological approach to evaluate the effect of pH on the mucoadhesive properties.

The design of mucoadhesive drug delivery systems (DDS) based on polysaccharides at nanoscale or microscale is a relevant technological strategy for the mucosal delivery of several drugs. Findings about the potential mucoadhesive ability of these materials and the mechanisms that drive such interactions represents an important advance for the rational modulation of these properties, according to specific uses. The potential mucoadhesive abilities of gellan gum (GG) and retrograded starch (RS) were investigated at pH 1.2 and 6.8, which were considered biorrelevant for the gastrointestinal tract (GIT). The effects of these polysaccharides on the MUC rheology were also addressed. Rheological studies revealed high MUC-GG interactions at both pH values (1.2 and 6.8), expressing a high mucoadhesive ability, mainly in acidic media. MUC-GG interactions were driven, mainly, by hydrogen bonds. At an acidic pH, significant changes occurred in the MUC arrangements due to the strong MUC-GG interactions, as corroborated by scanning electron microscopy (SEM). The rheological behavior of MUC-RS indicated poor interactions between them and MUC arrangements were more preserved as evidenced by SEM. The results of this work indicated that the mixing of GG and RS can be a promising strategy to modulate mucoadhesiveness of DDS, according to specific therapeutic needs.

Oral nanoparticles based on gellan gum/pectin for colon-targeted delivery of resveratrol.

Nanoparticles based on gellan gum/pectin blends were designed for colon-targeted release of resveratrol (RES). Their impact on drug release rates and permeability were evaluated using Caco-2 cell model and mucus secreting triple co-culture model. Polymeric nanoparticles (PNP) were successfully prepared by nebulization/ionotropic gelation, achieving high drug loading (>80%). PNP were spherical with a low positive charge density (+5mV) and exhibited diameters of around 330 nm. Developed PNP were able to promote effective modulation of drug release rates, so that only 3% of RES was released in acidic media over 2 h, and, in pH 6.8, the drug was released in a sustained manner, reaching 85% in 30 h. The permeability of RES-loaded PNP in the Caco-2 model was 0.15%, while in the triple co-culture model, in the presence of mucus, it reached 5.5%. The everted gut sac experiment corroborated the low permeability of RES-loaded PNP in the presence or absence of mucus and highlighted their high ability to interact with the intestinal tissue. Results indicate that the novel PNP developed in this work are safe and promising carriers for controlled delivery of RES at the colon.

Mucoadhesive films based on gellan gum/pectin blends as potential platform for buccal drug delivery.

Films of gellan gum:pectin blends were prepared by solvent casting method. Gellan gum:pectin mass ratios were varied (4:1; 1:1; 1:4) at different concentrations (3% or 4%) and glycerol was used as plasticizer (1 or 2%). The films were thin (18-30 µm), translucent, flexible, and homogeneous. The surface pH was suitable for buccal application. All films reached high mechanical resistance and the mucoadhesive ability of them was evidenced. High ratio of gellan gum improved the mechanical resistance and the mucoadhesion of the films as well as the control of drug release rates. The films did not disintegrate in simulate saliva up to 24 h and curcumin release could be sustained up to 12 h. The set of data evidence that the films designed in this work represent a potential platform for buccal drug delivery.

Gellan Gum/Pectin Beads Are Safe and Efficient for the Targeted Colonic Delivery of Resveratrol.

This work addresses the establishment and characterization of gellan gum:pectin (GG:P) biodegradable mucoadhesive beads intended for the colon-targeted delivery of resveratrol (RES). The impact of the polymer carrier system on the cytotoxicity and permeability of RES was evaluated. Beads of circular shape (circularity index of 0.81) with an average diameter of 914 µm, Span index of 0.29, and RES entrapment efficiency of 76% were developed. In vitro drug release demonstrated that beads were able to reduce release rates in gastric media and control release for up to 48 h at an intestinal pH of 6.8. Weibull's model correlated better with release data and b parameter (0.79) indicated that the release process was driven by a combination of Fickian diffusion and Case II transport, indicating that both diffusion and swelling/polymer chains relaxation are processes that contribute equally to control drug release rates. Beads and isolated polymers were observed to be safe for Caco-2 and HT29-MTX intestinal cell lines. RES encapsulation into the beads allowed for an expressive reduction of drug permeation in an in vitro triple intestinal model. This feature, associated with low RES release rates in acidic media, can favor targeted drug delivery from the beads in the colon, a promising behavior to improve the local activity of RES.

Mucoadhesive nanostructured polyelectrolytes complexes modulate the intestinal permeability of methotrexate.

Nanostructured polyelectrolytes complexes (nano PECs) loaded with methotrexate (MTX) were obtained by the polyelectrolyte complexation of chitosan (CS) and hyaluronic acid (HA), further incorporating hypromellose phthalate (HP). The mean diameter of nano PECs ranged from 325 to 458nm, with a narrow size distribution. Zeta potential was close to +30mV, decreasing to +21mV after the incorporation of HP, a range of values that favour the physical stability of system as the interaction with cationic biological membranes. The electrostatic interactions between the different components were indicated by the FTIR data. The mucoadhesiveness of nano PECs was demonstrated and MTX and HP influenced this property. The cell viability assays showed the biosafety of the isolated polymers and nano PECs in intestinal HT29-MTX and Caco-2 cell lines at 4h of test. The permeability values of MTX loaded in CS/HA nano PECs were 7.6 and 4-fold higher than those of CS/HA/HP nano PECS and free drug, respectively, in the Caco-2 monoculture. In mucus secreting co-culture cell model these values were 3 and 6.5 fold, respectively. Such features indicate that nano PECs developed in this work can be promising carriers for MTX in the treatment of local or systemic diseases.

Effect of in situ modification of bacterial cellulose with carboxymethylcellulose on its nano/microstructure and methotrexate release properties.

Bacterial cellulose/carboxymethylcelullose (BC/CMC) biocomposites with different DS-CMC (DS from 0.7 to 1.2) were developed in order to evaluate their impact as a drug delivery system. Biocomposites were loaded with methotrexate (MTX) as an alternative for the topical treatment of psoriasis. Scanning electron microscopy and atomic force microscopy showed that the CMC coated the cellulose nanofibers, leading to the decrease of the elastic modulus as the DS of CMC increased. BC/CMC0.9 exhibited the lower liquid uptake (up to 11 times lower), suggesting that the more linear structure of the intermediate substitute CMC grade (0.9) was able to interact more strongly with BC, resulting in a denser structure. All samples showed a typical burst release effect in the first 15min of test, however the BC/CMC0.9 biocomposite promoted a slight lowering of MTX release rates, suggesting that the DS of CMC can be considered the key factor to modulate the BC properties.

A novel approach in mucoadhesive drug delivery system to improve zidovudine intestinal permeability

ABSTRACT Zidovudine (AZT) mucoadhesive solid dispersions (SD) were prepared using a sodium starch glycolate (SSG) and hypromellose phthalate (HPMCP) mixtures as carrier to enhance the intestinal permeability and bioavailability of zidovudine. SDs were prepared using the co-precipitation method followed by solvent evaporation and characterized according to their physicochemical properties such as particle size, crystallinity, thermal behavior, and liquid uptake ability. In vitro drug dissolution, mucoadhesiveness and AZT intestinal permeability were also determined. Thermal behavior and X-ray diffraction patterns demonstrated the amorphous state of AZT in SD systems. The HPMCP polymer restricted the liquid uptake ability in the acid medium; however, this property significantly increased with higher pH values. SDs allowed drug dissolution to occur in a controlled manner. HPMCP decreased the dissolution rates in the acid medium. The mucoadhesiveness of SDs was demonstrated and the permeability of AZT carried in solid dispersions was significantly improved. The effect of the SD carrier polymers on blocking efflux pump can be an important approach to improve the bioavailability of AZT.

Cellulose triacetate films obtained from sugarcane bagasse: Evaluation as coating and mucoadhesive material for drug delivery systems.

Cellulose triacetate (CTA) films were produced from cellulose extracted from sugarcane bagasse. The films were characterized using scanning electron microscopy (SEM), water vapor permeability (WVP), mechanical properties (MP), enzymatic digestion (ED), and mucoadhesive properties evaluation (MPE). WVP showed that more concentrated films have higher values; asymmetric films had higher values than symmetric films. MP showed that symmetric membranes are more resistant than asymmetric ones. All films presented high mucoadhesiveness. From the WVP and MP results, a symmetric membrane with 6.5% CTA was selected for the coating of gellan gum (GG) particles incorporating ketoprofen (KET). Thermogravimetric analysis (TGA) showed that the CTA coating does not influence the thermal stability of the particles. Coated particles released 100% of the KET in 24h, while uncoated particles released the same amount in 4h. The results highlight the CTA potential in the development of new controlled oral delivery systems.

Gellan gum microspheres crosslinked with trivalent ion: effect of polymer and crosslinker concentrations on drug release and mucoadhesive properties.

Gellan gum microspheres were obtained by ionotropic gelation technique, using the trivalent ion Al(3+). The percentage of entrapment efficiency ranged from 48.76 to 87.52% and 2(2) randomized full factorial design demonstrated that both the increase of polymer concentration and the decrease of crosslinker concentration presented a positive effect in the amount of encapsulated drug. Microspheres size and circularity ranged from 700.17 to 938.32 µm and from 0.641 to 0.796 µm, respectively. The increase of polymer concentration (1-2%) and crosslinker concentration (3-5%) led to the enlargement of particle size and circularity. However, the association of increased crosslinker concentration and reduced polymer content made the particles more irregular. In vitro and ex vivo tests evidenced the high mucoadhesiveness of microspheres. The high liquid uptake ability of the microspheres was demonstrated and the pH variation did not affect this parameter. Drug release was pH dependent, with low release rates in acid pH (42.40% and 44.93%) and a burst effect in phosphate buffer pH (7.4). The Weibull model had the best correlation with the drug release data, demonstrating that the release process was driven by a complex mechanism involving the erosion and swelling of the matrix or by non-Fickian diffusion.

Mucoadhesive beads of gellan gum/pectin intended to controlled delivery of drugs.

Gellan gum/pectin beads were prepared by ionotropic gelation, using Al(3+) as crosslinker. High yield (92.76%) and entrapment efficiency (52.22-88.78%) were reached. Beads exhibited high circularity (0.730-0.849) and size between 728.95 and 924.56 µm. Particle size and circularity was increased by raising polymer and crosslinker concentrations. Polymers ratio did not influence beads properties. The materials stability and the absence of drug-polymers interactions were evidenced by thermal analysis and FTIR. The high beads mucoadhesiveness was evidenced by in vitro and ex vivo tests. The erosion of beads was greater in acid media while swelling was more pronounced in pH 7.4. Drug release was dependent on pH in which samples 11H1-3, 11H1-5 and 41H1-3 released only 34%, 20% and 22% of ketoprofen in pH 1.2, while in pH 7.4 the drug release was sustained up to 360 min. Korsmeyer-Peppas model demonstrated that drug release occurred according to super case-II transport.

Films from resistant starch-pectin dispersions intended for colonic drug delivery.

Free films were obtained by the solvent casting method from retrograded starch-pectin dispersions at different polymer proportions and concentrations with and without plasticizer. Film forming dispersions were characterized according to their hardness, birefringence and rheological properties. The polymer dispersions showed a predominantly viscous behavior (G″>G') and the absence of plasticizers lead to building of stronger structures, while the occurrence of Maltese crosses in the retrograded dispersions indicates the occurrence of a crystalline organization. Analyses of the films included mechanical properties, thickness, superficial and cross sectional morphology, water vapor permeability, liquid uptake ability, X-ray diffractometry, in vitro dissolution and enzymatic digestion. The high resistant starch content (65.8-96.8%) assured the resistance of materials against enzymatic digestion by pancreatin. Changes in the X-ray diffraction patterns indicated a more organized and crystalline structure of free films in relation to isolated polymers. Increasing of pectin proportion and pH values favored the dissolution and liquid uptake of films. Films prepared with lower polymer concentration presented better barrier function (WVP and mechanical properties).

Preparation and characterization of free films of high amylose/pectin mixtures cross-linked with sodium trimetaphosphate.

High amylose and pectin were mixed at 1:1 mass ratio and cross-linked with sodium trimetaphosphate (STMP) in alkaline medium. Films were prepared from aqueous dispersions of these cross-linked polymer blend at three different concentrations (3, 4 and 5%), by solvent casting method. Characterization of the films included thickness, surface morphology, water uptake, water vapor permeability (WVP), tensile strength measurements and enzymatic digestion. The cross-linking allowed to obtain films with improved mechanical properties and reduced WVP. The high resistance to enzymatic digestion exhibited by these films represents a promising approach to their application in the development of colon drug delivery systems.